3Com WX1200 Reference Manual page 488

488 C A: C
HAPTER HANGING
3WXM P
REFERENCES
For each scheme, you can change a color using any of the following
methods:
Select a color from a predefined palette.
Change the hue, saturation, and brightness (HSB) properties of a color.
Change the red, blue, and green (RGB) properties of a color.
To Change a Color
1 Select Tools > Preferences. The Preferences dialog box appears.
2 Click the RF tab.
3 Select one of the following tabs:
802.11a Channel Colors
802.11b/g Channel Colors
RF Obstacle Colors
Data Rate Colors
RSSI Band Colors
SNR Band Colors
Load Band Colors
Probability Colors
4 Click on the color column for the color you want to change. The Choose
Color dialog box appears.
See one of the following sections:
For more information about using the color palette, see "Defining a
Color from the Palette" on page 488.
For more information about using HSB, see "Defining a Color by
Changing HSB Properties" on page 489.
For more information about using RGB, see "Defining a Color by
Changing RGB Properties" on page 490.
Defining a Color from the Palette
1 To specify a color using the color palette, click Swatches in the Choose
Color dialog box.
2 From the color palette, click the color you want to see. Repeat until you
find the color you want.