3Com WX1200 Reference Manual page 329

9 Select the Distributed MAPs for which the location policy is applied and
click Add.
10 Click Next.
11 In the Action list, select one of the following:
Permit—Allows access if the conditions in the location policy rule are
matched.
If you select Permit, you must specify at least one of following:
In ACL Name—ACL applies to packets sent to the WX (See
step 12.)
Out ACL Name—ACL applies to packets sent from the WX (See
step 13.)
VLAN Name (See step 14.)
Deny—Refuses network access if the conditions in the location policy
rule are matched.
If you select Deny, go to step 14.
12 In the In ACL Name box, type the name of the input ACL that applies if
the location policy rules are matched.
The ACL name can be 1 to 32 alphanumeric characters, with no spaces or
tabs. The name can include hyphens (-), underscores (_), or periods (.).
ACL names are case-sensitive and must begin with a letter. Do not
include any of the following terms in the name: all, default-action,
map, help, editbuffer.
13 In the Out ACL Name box, type the name of the output ACL that applies
if the location policy rules are matched.
14 In the VLAN Name box, type the name of the VLAN to which users are
assigned if the location policy rules are matched. The name can be
1 to 32 alphanumeric characters, with no spaces or tabs.
15 Click Finish.
Viewing and Changing Location Policy Rules 329