3Com WX1200 Reference Manual page 247

The next step depends on the encryption type you selected in step 5:
If you selected Encrypted, go to step 8.
If you selected Clear, go to step 18.
8 Select the access type:
802.1X Access—Device is allowed onto the SSID only after successful
authentication using 802.1X.
MAC Access—Device is allowed onto the SSID only if its MAC address
matches an entry on a RADIUS server or the switch's local database.
Open Access—All devices are allowed onto the SSID.
9 Click Next.
10 Select the security modes you want the SSID to support. You can select
one or more of the following:
RSN (WPA2)
WPA
Static WEP
11 Click Next.
12 If you selected RSN or WPA in step 10, select the encryption algorithms to
use. Otherwise, go to step 16.
AES (CCMP)—Usually used with RSN (WPA2)
TKIP—Usually used with WPA
WEP-104—Used with dynamic WEP
WEP-40—Used with dynamic WEP
13 Click Next.
14 If you selected RSN or WPA in step 10, you can select whether to use
dynamically generated keys, or static keys based on a passphrase.
To use dynamically generated keys, leave the Pre-shared Key box
blank and go to step 15.
To use static keys, type a string from 8 to 63 characters long in the
Pre-shared Key box and click Generate.
15 Click Next.
16 If you selected Static WEP in step 12, specify WEP keys. Otherwise, go to
step 17.
For each key (up to four), type the key value in the corresponding key box.
Viewing and Configuring Wireless Services 247