3Com WX1200 Reference Manual page 193

Configuring a Notification Profile
A notification profile is a named list of all the notification types that can
be generated by a switch, and for each notification type, the action to
take (drop or send) when an event occurs.
1 Access the Create Notification Profile wizard:
a Select the Configuration tool bar option.
b In the Organizer panel, click the plus sign next to the WX switch.
c Click the plus sign next to System.
d Select Management Services.
e In the Task List panel, select Notification Profile.
2 In the Profile Name box, type the name of the notification profile. The
name can be 1 to 32 alphanumeric characters, with no spaces or tabs.
3 Click the checkbox next to each notification type you want to enable. To
enable all notification types, click the Enable checkbox at the top of the
list.
4 Click Finish.
Configuring a Notification Target
A notification target is a remote device to which MSS sends SNMP
notifications. You can configure the MSS SNMP engine to send
confirmed notifications (informs) or unconfirmed notifications (traps). The
available options differ depending on the SNMP version and the type of
notification you specify.
To monitor a switch using 3WXM Services, you must configure 3WXM
Services to be one of the switch's notification targets.
3WXM Services does not start listening for SNMP notifications from the
WX switches in the network plan until you save the network plan.
1 Access the Create Notification Target wizard:
a Select the Configuration tool bar option.
b In the Organizer panel, click the plus sign next to the WX switch.
c Click the plus sign next to System.
d Select Management Services.
e In the Task List panel, select Notification Target.
Viewing and Changing Management Settings 193