Starting Or Stopping 3Wxm Services On Linux Systems - 3Com WX1200 Reference Manual

496 C B: C 3WXM S P
HAPTER HANGING ERVICES REFERENCES
Starting or Stopping You can start or stop the service by configuring the service as a daemon.
3WXM Services on
After 3WXM Services is started, you must enable the 3WXM client to
Linux Systems
access the service. (See "Connecting to 3WXM Services".)
Configuring the Service as a Daemon
The following examples show methods you can use to configure 3WXM
Services to automatically start and stop. Other methods might also work.
These are the ones that 3Com has tested.
Linux Example—SUSE 9.1 The recommended way to add services to a
SUSE 9.1 installation is with the insserv command. Enter commands
such as the following (as root):
suse# cd /etc/init.d
suse# ln -s /opt/3wxm/bin/3wxm-services 3wxm-services
suse# insserv 3wxm-services
Linux Example—Red Hat WS 3 The recommended way to add
services to a Red Hat WS 3 system is with the chkconfig command. Enter
commands such as the following (as root):
redhat# cd /etc/init.d
redhat# ln -s /opt/3wxm/bin/3wxm-services 3wxm-services
redhat# chkconfig --add 3wxm-services