3Com WX1200 Reference Manual page 426

426 C 16: M
HAPTER ONITORING THE
N
ETWORK
Table 43 Activity Details for Authorization Successful (continued)
Column Description
Auth Protocol Type 802.1X protocol used to authenticate the client:
Client Location Mobility Domain, WX switch, MAP, and radio that were
dealing with the client.
Session ID ID used by 3Com equipment to track the session within the
Mobility Domain.
Client IP Address IP address of the client.
Session State State of the user session:
Auth Server IP System IP address of the WX switch that was attempting to
authenticate the client.
Note — The system IP address is listed even if the switch was
using a RADIUS server to authenticate the client.
SSID SSID the client was requesting.
EAP-TLS
MD5
NONE
PASS-THROUGH
PEAP
Associated — User is authenticated using an 802.11
protocol and associated with a MAP.
Authorizing — User is authenticated and is starting the
AAA authorization process.
Authorized — User is authorized.
Active — User's session is fully active.
Deassociated — User is disassociated from the MAP.
Roaming_away — User is roaming (a connection in the
new location is established).
Updated_to_roam — User is roaming. Session statistics
have been collected and will be transmitted to the new
location.
Web_authing — User is being authenticated by
WebAAA.
Wired — User is being authenticated using an 802.11
protocol on a wired authentication port.
Clearing — User session is being terminated.
Invalid — Usually indicates the session is being
terminated, and session information is no longer available.