Changing The Map-Wx Security Mode; Configuring Advanced Map Settings - 3Com WX1200 Reference Manual

11 Click Finish.
Changing the
MAP-WX Security
Mode
Configuring
Advanced MAP
Settings
c In the Channel Number list, select the channel number for the radio.
If RF Auto-Tuning for channel configuration is enabled, setting this value
has no effect. The channel number is controlled by RF Auto-Tuning.
d In the Transmit Power box, specify the transmit power for the radio.
If RF Auto-Tuning for power configuration is enabled, setting this value
has no effect. The power level is controlled by RF Auto-Tuning.
e If the MAP has two radios, click Next and repeat this step for the
other radio. Otherwise, go to step 11.
To change the MAP-WX security mode for all Distributed MAPs, select
the value from the Security Mode drop-down list:
None—Management traffic between Distributed MAPs and the WX is
not encrypted, even for MAPs that support encryption.
Optional—Distributed MAPs can be managed by the switch even if
they do not have encryption keys or their keys have not been verified
by an administrator. Encryption is used for MAPs that support it.
Require—Distributed MAPs can be managed by the switch only if they
have encryption keys and their keys have been verified by an
administrator. If a MAP does not have an encryption key or the key
has not been verified, the WX does not establish a management
session with the MAP.
The setting applies to all Distributed MAPs booted and managed by the
switch. A change to this setting affects only new management sessions
established after you deploy the change to the switch. The change does
not affect existing sessions.
After you configure a MAP, you can select the MAP and click Properties
to display a configuration wizard that contains all the configurable
parameters for the MAP.
You also can edit values listed in the table by editing them in the table
itself.
1 Access the MAP table:
a Select the Configuration tool bar option.
b In the Organizer panel, click the plus sign next to the WX switch.
Viewing and Configuring MAPs 279