3Com WX1200 Reference Manual page 75

1 In the Site Name box, type a name for the site (1 to 80 alphanumeric
characters, with no spaces or tabs).
2 To change the Country Code, select Setup Country Code in the Task List
panel, then in the Change Country Code dialog, select the country where
the network is to be deployed.
3 In the Channel Set (802.11b/g) list, select the set of operating channels
for any 802.11b/g MAP radios you plan to use (if different from the
default).
From the Content panel, you can also change the properties of existing
buildings at the site. See "Creating or Modifying Buildings in a Site" next
for more information.
Creating or Modifying a Site 75