Configuring A Custom Service - 3Com WX1200 Reference Manual

254 C 7: C
HAPTER ONFIGURING
Configuring a Custom
Service
W P
IRELESS ARAMETERS
14 Click Next.
15 Select the VLAN into which you want the switch to place users of the
SSID.
If you want to specify the VLAN later when configuring the access rules,
you can leave the VLAN Name box blank.
16 Select or create the radio profile to map to this service profile.
By default, the default radio profile is selected.
To map the service profile to the default radio profile, leave default
selected and go to step 17.
To map the service profile to a different radio profile, select the radio
profile and go to step 17.
To create a new radio profile:
a Select Create new Radio Profile and click Next.
b Type the radio profile name in the Name box and click Next.
c Select the radios you want to manage with the radio profile and click
Move to move them to the Current Members list.
If you have not planned RF coverage or configured any MAPs in the
network plan yet, no radios are listed. You can add the radios later.
(Select the radio profile, click Properties, then select Radio Selection. See
"Configuring Advanced Radio Profile Settings" on page 267.)
d Go to step 17.
17 Click Finish.
If none of the other service types is appropriate, you can use the Custom
Service Profile wizard to configure the service. The screens and options
that are displayed depend on the access types and other elections you
make as you use the wizard. All pages and options occur in at least one
of the other service profile wizards. For information, see the procedures
for the other wizards.