Specifying Floor Properties For The Coverage Area - 3Com WX1200 Reference Manual

120 C 5: P
HAPTER LANNING THE
3C M S
OM OBILITY YSTEM
4 Click Next. The Floor Properties page appears.

Specifying Floor Properties for the Coverage Area

You can optionally specify floor properties for the coverage area (if they
are different from the defaults for the floor):
1 To change the ceiling height, specify the new height in the Height of the
Ceiling box.
2 To change the height where MAPs are mounted, specify the new
mounting height in the MAP Placement Height box.
3 Click Next. The Default Device Settings page appears.