3Com WX1200 Reference Manual page 415

RSSI measurements
Table 36 lists the RF measurement information that is displayed for the
measurement point.
Table 36 RF Measurement Information
Item
X (Feet)
Y (Feet)
Show Unreachable
MAPs
Show Disabled MAPs
MAP/AP
Distance (Feet)
Channel
RSSI (dBm)
Status
Value
Distance in the X direction from the 0,0 coordinate (the
upper left corner of the panel).
Distance in the Y direction from the 0,0 coordinate (the
upper left corner of the panel).
Show MAP access points that are too far away to
accurately measure signal strength.
Show all disabled MAP access points.
MAP or third-party access points detected.
Distance between MAP and RF measurement point.
Channel of the MAP or third-party access point.
Signal strength from the MAP at the RF measurement point.
Whether the MAP or third-party is active (OK) or disabled.
Using the Explore Window
RF measurement point
415