3Com WX1200 Reference Manual page 183

b Specify the user glob in the Matching User Glob box. To match on all
usernames, leave the wildcards (**) in the box. (For syntax
information, see "Access Rules" on page 240.)
To use an existing rule, leave the rule in the list.
c Click Next.
d Select the EAP type:
EAP-MD5 Offload
PEAP Offload
Local EAP-TLS
External RADIUS Server
If you select PEAP, the EAP Sub-Protocol is MS-CHAPV2. For other
protocols, the EAP Sub-Protocol is None.
(For information, see "EAP Type (802.1X Only)" on page 241.)
e Click Next.
f Select the authentication and accounting method.
(For information, see "AAA Methods (RADIUS Server Groups and the
Local User Database)" on page 242.)
g Click Next.
h To configure accounting, select Enabled, select the record type
(Start-Stop or Stop-Only), then select a RADIUS server group or LOCAL
for the accounting and click Add.
i Click Finish.
j Click Next.
6 To use MAC authentication to control access to the port, create or select
a MAC authentication rule. Otherwise, go to step 7.
If a MAC access rule for this port has already been configured, the rule
appears in the list on this page. You can select the rule or create a new
one.
To create a new rule:
a Click Create.
b Specify the MAC address glob in the Matching MAC Glob box. To
match on all MAC addresses, leave the wildcard (*) in the box. (For
syntax information, see "Access Rules" on page 240.)
Viewing and Changing Port Settings 183