Configuring Capacity Calculation For Voice - 3Com WX1200 Reference Manual

Configuring Capacity Calculation for Voice

3WXM can perform multiple calculations for MAP placement. One is
based on coverage only. Another is based on capacity for voice over IP
service, using the capacity for voice parameters. 3WXM compares the
results of the calculations and selects the calculation that results in more
MAPs.
1 To calculate MAP placement and configuration based on both coverage
and on capacity for voice over IP, enable Use Capacity Calculation for
Voice. Otherwise, click Next.
By default, 3WXM performs only the coverage calculation. If you enable
the Use Capacity Calculation for Voice option, 3WXM performs both
calculations.
2 In the Active Call Bandwidth list, specify the amount of bandwidth in
kilobits per second (Kbps) that you expect for each call.
Defining Wireless Coverage Areas 125