3Com WX1200 Reference Manual page 110

110 C 5: P
HAPTER LANNING THE
3C M S
OM OBILITY YSTEM
9 Select a floor to display LOS point information for that floor. Scroll down
to view the MAC address assignments for the LOS points.
Use the instructions in the Ekahau Site Survey Initial Setup section of the
work order to set up the survey.
When you import the floor map into the site survey tool, make sure you
use the map name specified in the work order. The site survey data will
not appear when you import RF measurements into 3WXM unless the
map name is correct.
Importing RF Measurements
1 Display the floor plan in the Content panel.
2 In the Task List panel, click RF Planning.
3 Under Site Survey, click Import Measurement. The Import RF
Measurements wizard is displayed.