Starting Or Stopping The 3Wxm Services - 3Com WX1200 Reference Manual

494 C B: C
HAPTER HANGING
Starting or
Stopping the
3WXM Services
3WXM S P
ERVICES REFERENCES
The 3WXM Services Setup window contains a configuration area and a
message area at the bottom. When you click Save to implement changes
you make on one of the window's tabs, the monitoring service verifies
the changes. If the changes are valid, the service implements the
changes. Otherwise, the service displays error messages and does not
implement the changes.
The method for starting and stopping monitoring service depends on the
platform on which the service is installed:
Windows systems—3WXM Services is started automatically when you
complete installation and starts automatically whenever you restart
your system.
Linux systems—You can start and stop the service manually from the
command line using a shell script that is installed when you install
3WXM Services. You also can configure the service to start and stop
automatically.
3Com recommends that all clients that are using 3WXM Services be
closed before you stop the services. If a 3WXM client is using a network
plan on 3WXM Services when you stop the services, you cannot select
objects or options in the client. In this case, to close the client, click the X
in the upper right corner of the window or use Task Manager to end the
client session.