Adjusting The Scale Of A Drawing - 3Com WX1200 Reference Manual

Adjusting the Scale of
a Drawing
If you click Yes, all objects and paper space outside the area you selected
are removed and the image is resized to fill the removed space.
Figure 1 on page 86 shows the same floor plan as Figure 2 (below) after
cropping the paper space.
Figure 2 Floor Plan After Cropping
If you imported a DWG or DXF drawing, you might need to adjust the
scale of the drawing because the units used in these drawings might not
have a one-to-one correspondence to meters and feet. To adjust the scale
of the drawing, you draw a line between two points of known distance
and adjust the measurement.
To adjust the scale
1 Display the floor plan in the Content panel.
2 Click on the toolbar.
3 Drag to create a line between two points. A dialog box appears.
4 In the dialog box, type the actual distance between the two points.
5 Click OK.
Importing or Drawing Floor Details 87