3Com WX1200 Reference Manual page 144

144 C 5: P
HAPTER LANNING THE
3C M S
OM OBILITY YSTEM
To see the RF coverage area for an area, right-click on the area (either in
the organizer panel or on the floor) and select Display RF Coverage. If
the area supports more than one radio technology, you also need to
select the technology. The choices available depend on the wireless
technology you chose for the coverage area.
This example shows the 802.11b coverage for an area.
3 To see the RF coverage area for a specific MAP or radio, right-click the
MAP or radio, and select one of the following:
Display RF Coverage > 802.11a
Display RF Coverage > 802.11b
Display RF Coverage > 802.11g
The choices available depend on the wireless technology you chose for
the coverage area.
The following example shows RF coverage provided by a specific MAP's
802.11a radio.