Specifying The Wireless Technology For A Coverage Area - 3Com WX1200 Reference Manual

118 C 5: P
HAPTER LANNING THE
3C M S
OM OBILITY YSTEM
The Create Coverage Area wizard appears.
Go to "Specifying the Wireless Technology for a Coverage Area".

Specifying the Wireless Technology for a Coverage Area

(To draw a coverage area, see "Drawing a Coverage Area" on page 116.)
To specify wireless technology for a coverage area:
1 In the Technology list, select one of the following:
802.11a
802.11b
802.11g
802.11a and 802.11b
802.11a and 802.11g
Select 802.11a and 802.11b if the area requires 802.11a and
802.11b coverage. Select 802.11a and 802.11g if the area
requires 802.11a and 802.11g coverage.
When you specify a coverage area requiring different technologies,
3WXM creates two areas that completely overlap each other: one area
for 802.11a and another for 802.11b/g. An area requiring 802.11a and
802.11b uses a dual-radio MAP model for calculation even if you specify
a single-radio MAP.