Concluding Step - Fujitsu PRIMERGY CX2550 M2 Upgrade And Maintenance Manual

Main memory
7.3.3

Concluding step

Perform the following procedures:
"Installing the memory slot air ducts" on page 49
Ê
Ê Connect the SATA cable(s) to the connectors on the system board described
in section "Cabling for HDD 2.5"" on page 208
described in section
Controller" on page
"Installing the server node in the server enclosure" on page 50
Ê
Ê If applicable, reconnect all external cables.
"Controls and indicators on the server node" on page 51
Ê
"Updating or recovering the system board BIOS and iRMC" on page 61
Ê
applicable)
"Verifying the memory mode" on page 74
Ê
"Resetting the error status after replacing memory modules or processors"
Ê
on page 86
126
"Cabling onboard" on page 208
209.
Upgrade and Maintenance Manual
and reroute the cables as
or "Cabling with RAID-
(if applicable)
(if
CX2550 M2