Power System Data 1; Description - Siemens SIPROTEC 4 User Manual

Functions
2.1 General
No. Information
125 Chatter ON
140 Error Sum Alarm
144 Error 5V
145 Error 0V
146 Error -5V
147 Error PwrSupply
160 Alarm Sum Event
177 Fail Battery
178 I/O-Board error
181 Error A/D-conv.
183 Error Board 1
184 Error Board 2
185 Error Board 3
186 Error Board 4
187 Error Board 5
188 Error Board 6
189 Error Board 7
191 Error Offset
192 Error1A/5Awrong
193 Alarm NO calibr
194 Error neutralCT
220 CT Ph wrong
301 Pow.Sys.Flt.
302 Fault Event
303 sens Gnd flt
320 Warn Mem. Data
321 Warn Mem. Para.
322 Warn Mem. Oper.
323 Warn Mem. New
335 >GOOSE-Stop
502 Relay Drop Out
510 Relay CLOSE
545 PU Time
546 TRIP Time
17565 >Blk.offset s.
17566 Dist.CFC Src

Power System Data 1

2.1.3
2.1.3.1

Description

The device requires certain basic data regarding the protected equipment so that the device can adapt to its
desired application. These may be, for instance, nominal power system and transformer data, measured quan-
tity polarities and their physical connections, breaker properties (where applicable) etc. There are also certain
parameters that are common to all functions, i.e. not associated with a specific protection, control or moni-
toring function. The following section discusses these parameters.
40
Type of Comments
Informa-
tion
OUT Chatter ON
OUT Error with a summary alarm
OUT Error 5V
OUT Error 0V
OUT Error -5V
OUT Error Power Supply
OUT Alarm Summary Event
OUT Failure: Battery empty
OUT I/O-Board Error
OUT Error: A/D converter
OUT Error Board 1
OUT Error Board 2
OUT Error Board 3
OUT Error Board 4
OUT Error Board 5
OUT Error Board 6
OUT Error Board 7
OUT Error: Offset
OUT Error:1A/5Ajumper different from setting
OUT Alarm: NO calibration data available
OUT Error: Neutral CT different from MLFB
OUT Error: Range CT Ph wrong
OUT Power System fault
OUT Fault Event
OUT sensitive Ground fault
OUT Warn: Limit of Memory Data exceeded
OUT Warn: Limit of Memory Parameter exceeded
OUT Warn: Limit of Memory Operation exceeded
OUT Warn: Limit of Memory New exceeded
SP >GOOSE-Stop
SP Relay Drop Out
SP General CLOSE of relay
VI Time from Pickup to drop out
VI Time from Pickup to TRIP
SP >Blocking of the offset supervision
VI Disturbance CFC Source
SIPROTEC 4, 7SJ62/64, Manual
C53000-G1140-C207-8, Edition 08.2016