Information List - Siemens SIPROTEC 4 User Manual

Addr. Parameter
640 Start image DD
700 GOOSE-Stop

Information List

2.1.2.4
No. Information
- >Light on
- Reset LED
- DataStop
- Test mode
- Feeder gnd
- Brk OPENED
- HWTestMod
- SynchClock
- Error FMS1
- Error FMS2
- Distur.CFC
1 Not configured
2 Non Existent
3 >Time Synch
5 >Reset LED
15 >Test mode
16 >DataStop
51 Device OK
52 ProtActive
55 Reset Device
56 Initial Start
67 Resume
68 Clock SyncError
69 DayLightSavTime
70 Settings Calc.
71 Settings Check
72 Level-2 change
73 Local change
110 Event Lost
113 Flag Lost
SIPROTEC 4, 7SJ62/64, Manual
C53000-G1140-C207-8, Edition 08.2016
Setting Options
image 1
image 2
image 3
image 4
image 5
image 6
image 7
image 8
image 9
image 10
YES
NO
Type of Comments
Informa-
tion
SP >Back Light on
IntSP Reset LED
IntSP Stop data transmission
IntSP Test mode
IntSP Feeder GROUNDED
IntSP Breaker OPENED
IntSP Hardware Test Mode
IntSP_Ev Clock Synchronization
OUT Error FMS FO 1
OUT Error FMS FO 2
OUT Disturbance CFC
SP No Function configured
SP Function Not Available
SP_Ev >Synchronize Internal Real Time Clock
SP >Reset LED
SP >Test mode
SP >Stop data transmission
OUT Device is Operational and Protecting
IntSP At Least 1 Protection Funct. is Active
OUT Reset Device
OUT Initial Start of Device
OUT Resume
OUT Clock Synchronization Error
OUT Daylight Saving Time
OUT Setting calculation is running
OUT Settings Check
OUT Level-2 change
OUT Local setting change
OUT_Ev Event lost
OUT Flag Lost
Default Setting Comments
image 1 Start image Default Display
NO GOOSE-Stop
Functions
2.1 General
39