Siemens SIPROTEC 4 User Manual page 607

for the Graphic Display of 7SJ625/6 and 7SJ641/2/5/7
[grundbild-grafikdisplay-020313-kn, 1, en_US]
Figure E-4
Spontaneous Fault Indication of the 4–Line Display
The spontaneous annunciations on devices with 4–line display serve to display the most important data about
a fault. They appear automatically in the display after general interrogation of the device, in the sequence
shown in the following figure.
[anzeige-spontanmeld-im-display-20070326, 1, en_US]
Figure E-5
Spontaneous Fault Indication of the Graphic Display
All devices featuring a graphic display allow to select whether or not to view automatically the most important
fault data on the display after a general interrogation. The information corresponds to those of the 4–Line
Display.
SIPROTEC 4, 7SJ62/64, Manual
C53000-G1140-C207-8, Edition 08.2016
Default displays for graphic display
Display of spontaneous messages in the HMI
Default Settings and Protocol-dependent Functions
E.5 Default Display
607