Information List; Set Points For Statistic; Description; Setting Notes - Siemens SIPROTEC 4 User Manual

Functions
2.25 Auxiliary Functions
2.25.6.3

Information List

No. Information
- I Admd>
- I Bdmd>
- I Cdmd>
- I1dmd>
- |Pdmd|>
- |Qdmd|>
- |Sdmd|>
- Press<
- Temp>
- 37-1
- |PF|<
270 SP. Pressure<
271 SP. Temp>
273 SP. I A dmd>
274 SP. I B dmd>
275 SP. I C dmd>
276 SP. I1dmd>
277 SP. |Pdmd|>
278 SP. |Qdmd|>
279 SP. |Sdmd|>
284 SP. 37-1 alarm
285 SP. PF(55)alarm
2.25.7

Set Points for Statistic

2.25.7.1

Description

For the statistical counters, setpoints may be entered and a message is generated as soon as they are reached.
The message can be allocated to both output relays and LEDs.
2.25.7.2

Setting Notes

Setpoints for the Statistical Counter
The setting of threshold values for the statistical counters takes place in DIGSI under Messages → Statistics in
the sub-menu Threshold Values for Statistics. Double-click to display the corresponding contents in another
window. By overwriting the previous value the settings can be changed (please refer to the SIPROTEC 4
System Description).
2.25.7.3 Information List
No. Information
- OpHour>
272 SP. Op Hours>
16004 ΣI^x>
338
Type of Comments
Informa-
tion
LV I A dmd>
LV I B dmd>
LV I C dmd>
LV I1dmd>
LV |Pdmd|>
LV |Qdmd|>
LV |Sdmd|>
LVU Pressure<
LVU Temp>
LV 37-1 under current
LV |Power Factor|<
OUT Set Point Pressure<
OUT Set Point Temp>
OUT Set Point Phase A dmd>
OUT Set Point Phase B dmd>
OUT Set Point Phase C dmd>
OUT Set Point positive sequence I1dmd>
OUT Set Point |Pdmd|>
OUT Set Point |Qdmd|>
OUT Set Point |Sdmd|>
OUT Set Point 37-1 Undercurrent alarm
OUT Set Point 55 Power factor alarm
Type of Comments
Informa-
tion
LV Operating hours greater than
OUT Set Point Operating Hours
LV Threshold Sum Current Exponentiation
SIPROTEC 4, 7SJ62/64, Manual
C53000-G1140-C207-8, Edition 08.2016