Siemens SIPROTEC 4 User Manual page 396

Mounting and Commissioning
3.1 Mounting and Connections
Input/Output Board C–I/O-1 (7SJ64)
[ein-ausgabebgr-c-io-1-160502-wlk, 1, en_US]
Figure 3-19
The selected control voltages of binary inputs BI8 to BI15 are checked according to
settings for the contact mode of binary output BO6 are checked according to
Figure 3-6 illustrates the assignment of the binary inputs to the mounting location.
Pickup Voltages of BI8 to BI15 for 7SJ641*-
Table 3-24
Binary Inputs
BI8
BI9
BI10
BI11
396
Input/output board C-I/O-1 with representation of the jumper settings required for the board
configuration
Jumper settings for the Pickup Voltages of the binary inputs BI8 to BI15 on the input/output
board C–I/O-1 for model 7SJ641*-
Jumper
X21/X22
X23/X24
X25/X26
X27/X28
DC 19 V Pickup 1) DC 88 V Pickup
L M
L M
L M
L M
Table 3-24. Jumper
Table 3-25.
2) DC 176 V Pickup
H
H
H
H
SIPROTEC 4, 7SJ62/64, Manual
C53000-G1140-C207-8, Edition 08.2016
3)