Setting The Filter For Safety Inputs - Siemens SINAMICS G120 Function Manual

5.7.2.1

Setting the filter for safety inputs

Control via onboard terminals
Precondition
You have selected the extended functions via onboard terminals.
Procedure
To set the filters for the safety inputs, proceed as follows:
1. Press the "Safety inputs/outputs" button.
2. Press the "Configuration" button.
3. Set the following:
4. Close the screen forms.
You have set the filter for the safety inputs.
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 04/2014, FW V4.7, A5E34261271B AA
③
–
Discrepancy time of the safety inputs.
④
– Input filter of the safety inputs.
Commissioning
5.7 Setting extended functions
113