Corrective Maintenance; Maintaining Operational Safety - Siemens SINAMICS G120 Function Manual

Corrective maintenance

7.1

Maintaining operational safety

Responsibility for operational safety
As company operating plants or machines or as supplier of plants and machines with safety-
related equipment, you are responsible for the operational safety of your plant or machine.
As a consequence, you are obliged to continually inform yourself about the products used.
Risk of death by using incorrect components in safety-related plants and systems
Disregarding current product developments and features can result in an increased risk of
accidents in safety-related plants and machines.
• Register to receive the appropriate newsletters on these topics.
• If necessary, modify your plant or machine so that the requirements of the safety
Registering to receive the newsletter
Procedure
Proceed as follows to register to receive a newsletter for inverters with integrated safety
technology:
1. In the Internet, open the following page: Siemens automation technology
2. On this page, open the "Support" folder.
3. In the "Support" folder, select the "Newsletter" link.
4. Select "Login" and log in with your access data.
5. Select the document type you wish to be informed about under "Select document type for
6. Under "Product support", open the "Safety technology - Safety Integrated" folder.
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 04/2014, FW V4.7, A5E34261271B AA
WARNING
functions are always complied with.
(www.automation.siemens.com).
If you have still not registered, then select "Register" and enter your access data.
topic and product newsletters".
7
251