Siemens SINAMICS G120 Function Manual page 274

System properties
8.3 Certification
You have loaded certificates relevant for Safety Integrated from the Internet.
EC Declaration of Conformity
According to Annex IV of the machinery directive, drives equipped with Safety Integrated are
defined as "Logic units for safety functions" and therefore as a safety component. The
machinery directive specifies that safety components should be handled just like machines.
As a consequence, safety components require a CE marking.
As machine builder, you must provide documentation that you create for the CE marking of
the machine, together with the EC Declaration of Conformity for the products that have been
installed.
The current EC Declarations of Conformity for the inverter are available in the Internet:
EC Declaration of Conformity
(http://support.automation.siemens.com/WW/view/en/67385845)
274
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 04/2014, FW V4.7, A5E34261271B AA