Installing; Installing The Inverter - Siemens SINAMICS G120 Function Manual

Installing

4.1

Installing the inverter

Procedure
The following overview shows the procedure for installing integrated safety functions in an
inverter. The step selected in gray is described in this manual. For information on the steps
that are not selected, you will need to consult descriptions in other manuals.
Proceed as follows:
1. If you are using a higher-level control system (PLC), then
2. Install the inverter.
3. Connect the inverter to the line supply, and wire the
4. Connect the safety inputs and outputs
You have installed the inverter and prepared it for commissioning.
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 04/2014, FW V4.7, A5E34261271B AA
create the control program first.
→ operating instructions of your inverter.
standard inputs and outputs of the inverter.
→ operating instructions of your inverter.
→ in this manual: Activation via F-DI (Page 51).
→ in this manual: Evaluating via F-DO (Page 71).
4
41