Setting The Filter For Safety-Related Inputs - Siemens SINAMICS G120C Operating Instructions Manual

Advanced commissioning
6.8 Safe Torque Off (STO) safety function
The screen form varies depending on the interface selected.
(A)
Figure 6-54
2. Select the signal that matches your particular application.
You have interconnected the "STO active" checkback signal. After STO has been selected,
the inverter signals "STO active" to the higher-level control.
Parameter
r9773.01
6.8.3.6

Setting the filter for safety-related inputs

Requirement
You are online with STARTER or Startdrive online.
Procedure with STARTER and Startdrive
To set the input filter and simultaneity monitoring of the safety-related input, proceed as
follows:
1. Navigate to the filter settings.
Figure 6-55
266
Control type
Interconnecting "STO active" in Startdrive
Description
1 signal: STO is active in the drive
Input filter and simuntaneity monitoring in STARTER
Operating Instructions, 07/2015, FW V4.7 SP3, A5E34263257B AC
SINAMICS G120C converter