Interconnecting The Signal For Fail-Safe Acknowledgment - Siemens SINAMICS G120 Function Manual

5.7.2.2

Interconnecting the signal for fail-safe acknowledgment

Precondition
You have selected the extended functions via onboard terminals.
Procedure
To assign the fail-safe acknowledgement signal to a safety input, proceed as follows:
1. Press the "Safety inputs/outputs" button.
2. Press the "Configuration" button.
3. Select a free safety input for fail-safe acknowledgment.
You have interconnected fail-safe acknowledge signal with a safety input.
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 04/2014, FW V4.7, A5E34261271B AA
If there are no free safety inputs available, you have to acknowledge the safety function
faults using a different method.
Also see section: Acknowledging using a fail-safe signal (Page 232).
Commissioning
5.7 Setting extended functions
119