Checking The Starter Clutch - APRILIA MSS Mana GT ABS Service Station Manual

Table of Contents

Advertisement

MSS Mana GT ABS
Flywheel components check
- Check that the magnets are in good conditions.
- Check that the magnet support cage is not de-
formed or broken.

Checking the starter clutch

- Make sure the freewheel faying surfaces are in good condition.
- Thoroughly clean the freewheel to remove any LOCTITE left.
- Degrease the threading of the freewheel holes and the fixing screws.
- Apply the recommended product to the end of the screws.
Recommended products
Loctite 243 Medium strength threadlock
-
- Fit the freewheel on the magneto flywheel, mak-
ing sure that the ground side is in contact with the
flywheel, that is the wheel seeger ring should be
visible.
- Tighten the 6 fixing screws in a criss-cross se-
quence to the prescribed torque.
- Lubricate the freewheel «rollers».
Engine
ENG - 175

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents