Suspensions
Specific tooling
AP8140150 Perforated rod for piston air bleed
•
Fit the special tool.
Specific tooling
020888Y Pliers for pre-fill pipe
•
With the aid of a second operator, hold
the pumping member rod firmly, lower
the spacer retention tool, insert the
stop ring and the plate separating the
spacer-pumping member between the
ring and the nut.
Specific tooling
AP8140148 Spacer-piston separating plate
•
Tighten completely the nut on the
pumping member pin rod.
•
Insert the sleeve cap on the pumping
member pin rod and tighten it.
•
Tighten the nut, on the cover to the
specified torque.
•
Tighten the sleeve cap, to the prescri-
bed tightening torque.
NOTE
SUSP - 302
MSS Mana GT ABS