MSS Mana GT ABS
PIN 26 - CAN H
PIN 27 - CAN L
PIN 28 - ABS Warning light input
PIN 29 - *
PIN 30 - Sensors ground
PIN 31 - + Battery
PIN 32 - Rear left turn indicator activation
PIN 33 - Rear right turn indicator activation
PIN 34 - Aerial 1
PIN 35 - Light relay activation
PIN 36 - Heated handgrips A
PIN 37 - Heated handgrips B
PIN 38 - General ground
PIN 39 - General ground
PIN 40 - General ground
ABS Modulator
INSERTION PROCEDURE OF ABS CONTROL UNIT CONNECTOR
•
Check the initial position of the lever that couples the connector.
•
When the connector is fully inserted,
the distance between the connector
and the ABS control unit must be 7.5
mm (0.29 in).
Electrical system
ELE SYS - 145