APRILIA MSS Mana GT ABS Service Station Manual page 184

Engine
Specification
Bearing A Ø:
Bearing B Ø:
- Using a gauge, measure the height of the cams.
Specification
Outlet:
Standard axial clearance:
Maximum axial clearance allowed:
Specification
Outlet:
- Check there are no signs of wear on the contact pads with the cam and on the articulated plate of the
set screws.
- In case of wear, replace the component.
- Check there are no signs of wear or scoring on the rocking lever pins.
Characteristic
Standard diameter:
Ø 13 - 0.010 -0.018 mm
See also
Assembly clearances
ENG - 184
MINIMUM DIAMETER ALLOWED
LIMITS ALLOWED
Inlet:
STANDARD HEIGHT
Inlet:
MSS Mana GT ABS
Desc./Quantity
41.910 mm
19.940 mm
Desc./Quantity
33.740 mm
33.170 mm
0 ÷ 0.22 mm
0.3 mm
Desc./Quantity
33.988 mm
33.417 mm