APRILIA MSS Mana GT ABS Service Station Manual page 357

MSS Mana GT ABS
Cooling system
- Fit the tie rod screwing it in the rotor shaft.
CAUTION
THE SHAFT THREAD IS ANTICLOCKWISE, SCREW IT
MANUALLY UNTIL IT STOPS.
- Place the calibrated punch (with preloading val-
ues).
- Apply the nut to the tie rod.
Lock the tie rod and screw the nut until the end of
stroke.
The tool the will fit the static seat on the crankcase
and the movable seat on the shaft, producing the
correct ceramic seal preloading.
COOL SYS - 357