APRILIA MSS Mana GT ABS Service Station Manual page 251

MSS Mana GT ABS
Engine
- Remove the spacer.
NOTE
THE SPACER IS CONICAL, UPON REFITTING PAY ATTEN-
TION TO INSERT IT WITH THE SMALLER DIAMETER FAC-
ING THE INSIDE.
- Undo the five fixing screws and remove the air
switch.
- Unscrew the control bushing from the driving pul-
ley.
CAUTION
ALWAYS REPLACE THE TWO O-RINGS AND FIT WITH
GREASE TO PREVENT PINCHING.
- Remove the ring nut and the stop washer from
the driving pulley with a wrench available in the
market.
CAUTION
THE SAFETY WASHER MUST BE REPLACED AT EACH
REMOVAL.
ENG - 251