APRILIA MSS Mana GT ABS Service Station Manual page 327

MSS Mana GT ABS
•
the ABS warning light flashes (SL 750 Shiver ABS / Dorsoduro 750 ABS)
When the 5 km/h (3.11 mph) are exceeded:
- if errors are not detected
•
the EFI warning light turns off and the word ABS on the display disappears (NA 850 Mana
ABS).
•
the ABS warning light turns off (SL 750 Shiver ABS / Dorsoduro 750 ABS)
- if at least one malfunction is detected
•
the EFI warning light turns on permanently and the word ABS appears on the display (NA
850 Mana ABS)
•
the ABS warning light turns on permanently (SL 750 Shiver ABS / Dorsoduro 750 ABS)
The ABS system is deactivated!
The system operates perfectly just as any other braking system without ABS.
The detection of malfunctions may require more or less time according to the type of failure.
Error detection logic foresees that for the errors to be diagnosed one or more conditions must persist
within a given time.
If during this given time one of the conditions is missing but then it comes back, the timer is reset and
the system is no longer able to diagnose the error.
The ABS system is still inactive.
Example:
- error code 5D93 requires some minutes before it is diagnosed during the given time:
•
A - The EFI warning light keeps flashing with the word ABS on the display (NA 850 Mana
ABS)
•
B - The ABS warning light keeps flashing (SL 750 Shiver ABS / Dorsoduro 750 ABS)
ABS FAULTS - GUIDE TO THE DIAGNOSIS
1a. NA 850 Mana - WARNING LIGHT+ ABS ICON 1b. Dorsoduro 750 - SL 750 Shiver - ABS WARN-
ING LIGHT TURNED ON
2. CONNECT AXONE
DOES AXONE COMMUNICATE? (NO, go to 3; YES, go to 4)
3. PERFORM THESE CHECKS:
•
A. Ground connection PIN 1
•
B. +12V at PIN 18
•
C. +12V at PIN 4 with key ON
4. ARE THERE ANY ERRORS? YES, go to point 5; NO, go to 6)
5. CONSULT THE ERRORS DISPLAY TABLE
6. ABS WARNING LIGHT ACTIVATION
ACTIVE?(YES, go to 7; NO, go to 8)
Braking system
BRAK SYS - 327