MSS Mana GT ABS
P0606 Microprocessor - circuit not operational.
Error cause
•
Possible internal control unit error. Also check the control unit supply and ground connec-
tions.
Troubleshooting
•
If the power supply and ground connections are connected correctly, replace the injection
control unit.
CONTROL UNIT REMOVAL
•
Remove the right lower protection.
•
Disconnect the connectors.
•
Undo and remove the ground cable fix-
ing screw.
•
Undo and remove the two control unit
fixing screws.
•
Remove the control unit.
NEW CONTROL UNIT ACTIVATION PROCEDURE
•
After installing a new control unit, it is necessary to carry out the Throttle positioner auto-
detection function using the diagnosis instrument
Electrical system
ELE SYS - 89