APRILIA MSS Mana GT ABS Service Station Manual page 44

Maintenance
•
Use a cloth to wipe off any mud deposit
on the area next to the filler plug (1).
•
Place a container with + 4000 cm³ (244
cu.in) capacity under the drainage plug
(2).
•
Unscrew and remove the drainage
plug (2).
•
Unscrew and remove the filler plug (1).
•
Drain the oil into the container; allow
several minutes for oil to drain out com-
pletely.
•
Replace the sealing washer of the
drainage plug and the O-ring of the cap
(2).
•
Screw and tighten the drainage plug
(2) paying attention that the O-ring is
adequately fitted so there are no oil
leaks from the tank to the sump.
CAUTION
IF THE O-RING IS NOT CORRECTLY FITTED, THIS RE-
SULTS IN LACK OF SEALING AND CAN CAUSE OIL LEVEL
TO INCREASE IN THE SUMP IN STATIC CONDITIONS.
Locking torques (N*m)
Engine oil drainage plug - M16x1.5 (1)
(15.49 - 21.39 lbf ft)
MAIN - 44
21 - 29 Nm
MSS Mana GT ABS