APRILIA MSS Mana GT ABS Service Station Manual page 69

MSS Mana GT ABS
TABLE R
19. The light switch connections must be placed
on the chassis pipe
20. The flywheel cable passes under the main ca-
ble harness
Note: where indicated, fasten with a 290 black
clamp on the reference position.
TABLE S
The pick-up sensor cable harness passes around
the fuel pipe and the main cable harness
21. Black clamps 178x4 (7.008x0.157)
TABLE T - Start-up relay
22. Start-up relay connections
Fasten where indicated with a 178x4
(7.008x0.157) black clamp
TABLE U - Engine control unit
Engine control unit fitting:
•
Connect the control unit to the main
cable harness;
•
Fit the control unit on the glove-box
with AP8150426 screws and
AP8201764 clips
Electrical system
ELE SYS - 69