Specific Tooling; Standard Values - APRILIA MSS Mana GT ABS Service Station Manual

Engine
CONTINUE - point 2
2 - Remove the electric connector of the minimum pressure switch.
Check that the warning light turns off.
YES - point 3 NO point 11
3 - Check the actual oil pressure.
CONTINUE - point 4
4 - Remove the switch and fit the specific tool with the relevant gasket.

Specific tooling

020193Y Gauge for oil pressure check
020434Y Fitting for oil pressure check
- Remove the dipstick with the oil filler plug and insert a plug with the temperature probe supplied with
the specific tool. Insert the probe to feel contact with the crankcase bottom and pull back a few milli-
metres.
Specific tooling
020331Y Digital multimeter
CONTINUE - point 5
5 - Measure pressure with cold and idling engine.
Specification
20°C Temperature
1400 rpm
~ 4.5 bar
YES - point 6 NO point 12
6 - Let the engine warm up and repeat the check with hot oil.
Specification
80°C Temperature
1400 rpm
~ 1.5 bar
YES - point 7 NO point 8
7 - Replace the minimum oil pressure.
ENG - 224

STANDARD VALUES

STANDARD VALUES
MSS Mana GT ABS
Desc./Quantity
Desc./Quantity