RS 660 - Tuono 660
•
Separate the free wheel (3) from the
flange (2).
Flywheel components check
- Check that the magnets are in good conditions.
- Check that the magnet support cage is not de-
formed or broken.
Checking the starter clutch
Remove the free wheel from its housing and check
the rollers for signs of wear.
Check if the outer spring is sufficiently preloaded
to hold the rollers in place.
Check for wear on the sliding surface of the free
wheel inside its housing.
IT IS NECESSARY TO REPLACE THE HOUSING OF THE
FREE WHEEL IF DEFORMATIONS OR DEEP GROOVES
ARE PRESENT ON THE SLIDING SURFACE.
Engine
ENG - 163