APRILIA MSS Mana GT ABS Service Station Manual page 356

Cooling system
- Fit the plate in its position and lock it by tightening
the two screws to the prescribed torque.
Locking torques (N*m)
Water pump gear protection plate tightening
screws
3 - 4 Nm (2.21 - 2.95 lb ft)
- Fit the water pump shaft together with the control
gear.
- Fit the idle gear.
Entire sealing fitting
CAUTION
CLEAN ALL THE COMPONENTS CAREFULLY.
CAUTION
LUBRICATE THE ROTOR SHAFT WITH OIL.
- Place the entire sealing on the shaft.
COOL SYS - 356
MSS Mana GT ABS