APRILIA MSS Mana GT ABS Service Station Manual page 294

Suspensions
•
Remove the external oil seal grip and
with specific tools push it to stop.
•
Refit the grip.
Specific tooling
AP8140189 Oil seal fitting tool for Ø 43 mm
(1.69 in) orifices
AP8140146 Weight
NOTE
THE FOLLOWING OPERATIONS REFER TO THE SACHS FORKS.
NOTE
THE OPERATIONS DESCRIBED BELOW ARE VALID FOR BOTH STEMS.
•
Fit the dust gaiter (1), seeger ring (2),
oil seal (3), ring (4), guide bushing (5)
and sliding bushing (6) on the stem.
CAUTION
FIT THE GUIDE BUSHING AND THE SLIDING BUSHING
WITH CAUTION.
GUIDE BUSHING (5) IS THICKER THAN SLIDING BUSHING
(6).
•
Fit the stem into the sleeve and place
the special fitting tool for fitting the D.
43 oil seal between the Seeger ring
and the oil seal.
Specific tooling
AP8140189 Oil seal fitting tool for Ø 43 mm
(1.69 in) orifices
•
Push the oil seal fitting special tool
hard, applied towards the sleeve with
the aid of the specific weight.
Specific tooling
AP8140146 Weight
SUSP - 294
MSS Mana GT ABS