APRILIA MSS Mana GT ABS Service Station Manual page 211

MSS Mana GT ABS
Splitting the crankcase halves
- Working from the transmission side, unscrew the
six screws «A» and collect the washers.
- Turn the support so as to operate on the flywheel
side.
- Undo the three screws fixing it to the support,
collect the washers and remove the three centring
bushings.
- Undo the seven screws «B» and collect the cop-
per washers.
- Undo the twelve screws «C» and collect the
washers.
- Fit the specific tool on the flywheel side crank-
shaft, paying special attention that the tool match-
es the shaft perfectly.
CAUTION
FAILURE TO OBSERVE THIS RULE CAN DAMAGE THE
MAIN BUSHINGS.
Specific tooling
020664Y Flywheel side crankshaft fitting tip
- Lubricate the external surface of the tip with petroleum jelly grease.
Engine
ENG - 211