APRILIA MSS Mana GT ABS Service Station Manual page 24

Characteristics
Name
Connecting rod
Complete crankshaft
Characteristic
Crankshaft-crankcase axial clearance (H)
0.1 ÷ 0.45 mm (when cold)
- Measure the inside diameter of the connecting
rod small end using a bore meter.
NOTE
IF THE CONNECTING ROD SMALL END DIAMETER EX-
CEEDS THE STANDARD DIAMETER, SHOWS SIGNS OF
WEAR OR OVERHEATING, REPLACE THE CRANKSHAFT
AS DESCRIBED IN THE «CRANKCASE AND CRANK-
SHAFT» CHAPTER.
Characteristic
Standard diameter:
22 + 0.025 +0.015 mm
Depending on the type of crankshaft/crankcase coupling, the following types of bushings listed in the
table should be used.
CHAR - 24
Description Dimensions
22 -0.10 -0.15
104 +0.1 -0.05
MSS Mana GT ABS
Initials Quantity
C D = 0.20 ÷ 0.60
E