APRILIA MSS Mana GT ABS Service Station Manual page 255

MSS Mana GT ABS
Engine
- Fit the bearing support being careful with the
dowel pin and tighten the four screws with Loctite
270.
- Fit the advancement bushing.
- Fit the stop washer and tighten the ring nut with
the level surface facing upwards.
CAUTION
ALWAYS REPLACE THE TWO O-RINGS AND FIT WITH
GREASE TO PREVENT PINCHING.
CAUTION
THE SAFETY WASHER MUST BE REPLACED AT EACH
REMOVAL.
ENG - 255