Suspensions
•
With the aid of a second operator, hold
the pumping member rod firmly, lower
the spacer retention tool, insert the
stop ring and the plate separating the
spacer-pumping member between the
ring and the nut.
Specific tooling
AP8140148 Spacer-piston separating plate
•
Insert the sleeve cap and screw the
nut.
•
Being careful not to damage the stan-
chion when placing it in a vice, in ver-
tical position, using the appropriate
protection.
Specific tooling
AP8140149 Protection for fitting operations
•
Tighten the sleeve cap.
SUSP - 304
MSS Mana GT ABS