APRILIA MSS Mana GT ABS Service Station Manual page 303

MSS Mana GT ABS
THE OPERATIONS DESCRIBED BELOW ARE VALID FOR BOTH STEMS.
•
Place the stanchion on a work table in upright position.
•
Fill the sleeve with the adequate quality and type of oil indicated on the recommended prod-
ucts table.
WARNING
MOVE THE PUMPING ELEMENT SEVERAL TIMES UNTIL
AIR BUBBLES ARE SEEN ON THE OIL SURFACE.
THE SLEEVE MUST BE PERFECTLY UPRIGHT IN ORDER
TO MEASURE THE CORRECT OIL LEVEL. THE OIL LEVEL
MUST BE THE SAME IN BOTH STANCHIONS.
Characteristic
Fork oil quantity (for each stem):
535 cm³ (32.65 cu.in)
Oil level (from sleeve rim, without the spring
and with pumping member fully down)
122 mm (4.80 in).
•
Fit the preloading pipe together with
the spring centring.
•
Fit the special tool.
Specific tooling
AP8140147 Spacer tool
Suspensions
SUSP - 303