Installing The Crankshaft - APRILIA MSS Mana GT ABS Service Station Manual

MSS Mana GT ABS
- Bushings are subdivided into 3 categories according to their thickness. (See chart on the "Specifica-
tions" chapter)

Installing the crankshaft

- Fit the driven pulley shaft and the universal joint
axle.
- Fit the specific tool on the transmission side
crankshaft, paying special attention that the tool
matches the shaft perfectly.
CAUTION
FAILURE TO OBSERVE THIS RULE CAN DAMAGE THE
MAIN BUSHINGS.
CAUTION
DUE TO THE TIP WEIGHT PAY ATTENTION TO THE COR-
RECT COUPLING AND FALLING RISKS OF THE TOOL,
ALWAYS HOLD IT WITH YOUR HANDS.
Specific tooling
020665Y Transmission side crankshaft fitting
tip
NOTE
LUBRICATE THE BUSHINGS WITH ENGINE OIL BEFORE FITTING THE CRANKSHAFT.
CAUTION
FIT THE TRANSMISSION SIDE TIMING CHAIN.
FIT THE DRIVE CHAIN BEFORE THE CRANKSHAFT.
- Lubricate the external surface of the tip with petroleum jelly grease.
Engine
ENG - 217